Sufix Siege

Diameter chart, reel capacity & backing guide

Representative Sufix Siege package, 20 lb, Neon Tangerine

Sufix Siege is a monofilament mainline for casting around abrasive cover. This guide covers 4 to 30 lb.

Construction
Monofilament
Listed strengths
4-20 lb
Line type
Monofilament main line

Casting mono near abrasive cover

Siege is the abrasion-oriented mono in this comparison. Its 12 lb size is labelled 0.014 in; the same strength in ProMix mono is 0.013 in. A reel marked only in pound-test cannot distinguish them.

Your line. Your reel.

How much Siege will fit?

Loading line data
Loading reel and line data...

Calculated estimates, not measured fills. Stop at the reel manufacturer's fill level even if some line remains.

The numbers behind the setup

Sufix Siege diameter chart

Sufix US publishes the inch specification. The listed packages are verified SKU examples, not every available color or length. No exact independent diameter test was verified for this family. The mm column converts the inch label (1 in = 25.4 mm). The last two rows are diameter-only: conflicting package lengths prevent selection in the calculator.

Listed diameters and offered spool lengths. Retail stock varies.
StrengthInchesmm (converted)Spools (yd)
0.0080.2032 330
0.0100.254 330
0.0110.2794 330
0.0120.3048 330
0.0140.3556 330
0.0150.381 330
0.0160.4064 330
0.0180.4572 330
25 lb0.0200.5080Not confirmed
30 lb0.0220.5588Not confirmed
Choosing your setup

Choosing your Siege strength

At 8 lb the label is 0.011 in. Moving up to 12 lb raises that to 0.014 in, so allow for a shorter fill even on the same reel.

For 25 or 30 lb, use the diameter chart to identify the line, then verify the yardage on the package itself.

Specification-based estimate, not a physical spooling test.

Want a guided recommendation?

Continue in the Setup Wizard
Compare actual diameters

Same pound test, different diameters

At your selected strength

Loading diameter comparisons...

What changes with another line?

Select a replacement line to compare.

Nearby diameters in the line database

LineStrengthInchesDifference
Loading line database...
At the spooling bench

Backing, working line & leaders

Check the working length

For the 10 lb size the verified package contains 330 yd. Compare that with the estimated full fill before cutting line.

Full fill or backing?

A continuous mainline avoids a backing knot. For a shorter working section, allow enough line for your longest cast or drop, a run and retying before adding backing.

Calculated examples

How Much Fits on These Reels?

Estimated full-spool capacity for the Siege strength selected above, with no backing. These are calculated examples, not physical tests or recommendations for every pairing.

Loading capacity estimates...

Siege questions, answered

Why is the length missing at 25 and 30 lb?

The US product text says 250 yd, but the variant data says 330 yd. Check the package in hand; the 0.020 and 0.022 in diameter labels do not depend on resolving that discrepancy.

How much space does 30 lb take compared with 4 lb?

At the same fill level, the 30 lb size takes about 13% of the yardage of the 4 lb size using their listed inch diameters. This comparison assumes equal packing; it is not a measurement of a filled reel.

Specifications & sources

Sufix US publishes the inch specification. The listed packages are verified SKU examples, not every available color or length. No exact independent diameter test was verified for this family.

Calculations use the catalog's listed inch diameters. Millimeters here are unit conversions from the published inches, not separate manufacturer or laboratory measurements.