Rhino Hide Camo Monofilament
Diameter chart, reel capacity & backing guide
Rhino Hide Camo Monofilament is Zebco's mono main line in 330-yard filler spools, with options from 6 to 30 lb in this chart. Choose a strength to compare its diameter and full-spool amount; the 200-yard Rhino Hide braid is a separate product.
- Construction
- Camouflage monofilament
- Listed strengths
- 6-30 lb
- Line type
- Monofilament main line
A camo mono working line
Rhino Hide Camo Mono is a single-strand option when you prefer mono's stretch and a continuous main line. The lighter sizes are easier to evaluate for smaller spinning setups; heavier sizes need a reel and presentation that can handle their diameter. Compare the 330-yard package with your planned fill before deciding whether to use it all or retain some for a later refill.
How much Rhino Hide Mono will fit?
Calculated estimates, not measured fills. Stop at the reel manufacturer's fill level even if some line remains.
Rhino Hide Camo Monofilament diameter chart
RNMF330 Green Camo child product codes provide the verified 6-30 lb options, each at 330 yards.
| Strength | Inches | mm | Spools (yd) |
|---|---|---|---|
| 0.009 | 0.2286 | 330 | |
| 0.010 | 0.260 | 330 | |
| 0.011 | 0.286 | 330 | |
| 0.012 | 0.3048 | 330 | |
| 0.014 | 0.3556 | 330 | |
| 0.016 | 0.4064 | 330 | |
| 0.017 | 0.440 | 330 | |
| 0.020 | 0.508 | 330 |
Choosing your Rhino Hide Mono strength
Start with the lighter 6-10 lb options only where the rod, lure and target fish justify them. Check spool handling before treating the capacity result as a recommendation.
The 12-20 lb group occupies more volume and is a different choice from fine mono. Choose it for tackle and cover requirements rather than copying a reel's printed capacity test.
At 25-30 lb, the physical diameter matters considerably. Keep these rows separate from Rhino braid of the same test.
This is a source-based specification and setup guide, not a hands-on review or comparative performance test.
Want a guided recommendation?
Continue in the Setup WizardSame pound test, different diameters
At your selected strength
Loading diameter comparisons...
What changes with another line?
Nearby diameters in the line database
| Line | Strength | Inches | Difference |
|---|---|---|---|
| Loading line database... | |||
Backing, working line & leaders
Check the RNMF330 package
Confirm mono, strength and the 330-yard label before planning the fill. The similarly named RNB200 braid is not interchangeable.
Choose full mono or a working section
A full fill avoids a backing junction. A shorter mono working section can use backing below it when the reel holds more line than needed; keep the connection out of normal casts.
Stop at the reel's fill limit
Use steady tension and the recommended spool-lip clearance. Keep unused line for another fill instead of overfilling to finish the package.
How Much Fits on These Reels?
Estimated full-spool capacity for the Rhino Hide Mono strength selected above, with no backing. These are calculated examples, not physical tests or recommendations for every pairing.
Loading capacity estimates...
Rhino Hide Mono questions, answered
Is Rhino Hide mono the same as the braid?
No. This is RNMF330 monofilament in 330-yard spools. RNB200 is braid in 200-yard spools.
Are all millimeter figures manufacturer measurements?
No. The checked attributes publish mm for 8 and 25 lb, and the official 10 lb package prints .286 mm. Other mm values are converted from published inches.
Will 330 yards fill two reels?
Only when their combined planned working fills fit within 330 yards, allowing for waste and knots. Backing can fill unused spool volume; it does not add working-line length.
Does a capacity fit prove 30 lb is suitable?
No. Rod rating, lure, cover and handling on the reel still determine suitability.
Specifications & sources
Checked September 13, 2026 against the official product information linked below. Official attributes publish inches for all tests and mm for 8 and 25 lb. The official 10 lb RNMF330-10GC package additionally prints .286 mm. Other mm values are explicit conversions from inches, not legacy database measurements. Offered specifications do not establish current stock; this is not an independent diameter measurement.
Calculations use the catalog's listed inch diameters. Published inch and millimeter values may differ slightly because of rounding.
- Rhino official product information Exact official US product child attributes verify all assigned strengths, retail yards and diameters. Manufacturer tags this as launch year 2027; this is a current published specification, not a claim of retail stock.