Daiwa J-Braid X8: US Dark Green

Diameter chart, reel capacity & backing guide

Daiwa J-Braid X8: US Dark Green fishing line packaging

Look for JB8U on the spool. This is standard J-Braid X8, not X4, Grand X8 or Expedition. The US 2025-26 catalog lists the 30 lb Dark Green filler at 0.011 in / 0.28 mm. The two package sizes here are 150 and 300 meters, not yards.

Construction
Eight-carrier PE braid
Listed strengths
10-65 lb
Line type
Braid main line

Which Dark Green spool do you have?

Read the model code next to the barcode. For example, JB8U30-300DG is the 30 lb, 300 m package. If your label says Grand or starts with a different model prefix, use that line's own chart. Similar names do not establish the same diameter.

Your line. Your reel.

How much J-Braid X8 will fit?

Loading line data
Loading reel and line data...

Calculated estimates, not measured fills. Stop at the reel manufacturer's fill level even if some line remains.

The numbers behind the setup

Daiwa J-Braid X8 diameter chart

US 2025-26 catalog, standard Dark Green JB8U filler spools only. These six strengths agree with existing ReelCalc diameters. The catalog and legacy entries differ at 6, 8 and 15 lb; those sizes are not selectable here.

Listed diameters and offered spool lengths. Retail stock varies.
StrengthInchesmmSpools (m / yd)
0.0060.150 150 m (about 165 yd), 300 m (about 330 yd)
0.0090.230 150 m (about 165 yd), 300 m (about 330 yd)
0.0110.280 150 m (about 165 yd), 300 m (about 330 yd)
0.0130.320 150 m (about 165 yd), 300 m (about 330 yd)
0.0140.360 150 m (about 165 yd), 300 m (about 330 yd)
0.0160.410 150 m (about 165 yd), 300 m (about 330 yd)

Line Laboratory: 30 lb sample

The lab lists this sample as "Daiwa JBraid x8". Its quoted diameter is 0.28 mm; its measured average is 0.379 mm. This is a measurement of the tested sample, not the diameter of every spool or a measurement of yardage on a reel.

Line Laboratory homepage (no individual report confirmed; diameter feed cited below).
Choosing your setup

Choosing your J-Braid X8 strength

For a smaller spool, compare the 10 lb row (0.006 in) with 20 lb (0.009 in) before choosing how much line to buy. Moving to the thicker line leaves less room for a given length.

At 30 lb the diameter is 0.28 mm; at 40 lb it is 0.32 mm. Choose the strength for your tackle and cover first, then check room for the working line. The pound label alone does not tell you how much fits.

Listed diameters drive the calculator. The independent lab sample is not a reel-fill test or a correction factor for other strengths.

Want a guided recommendation?

Continue in the Setup Wizard
Compare actual diameters

Same pound test, different diameters

At your selected strength

Loading diameter comparisons...

What changes with another line?

Select a replacement line to compare.

Nearby diameters in the line database

LineStrengthInchesDifference
Loading line database...
At the spooling bench

Backing, working line & leaders

Read meters on the filler

Daiwa lists 150 m as 165 yd and 300 m as 330 yd in this catalog. The calculator uses those printed yard figures. Check the unit on your own package before planning the fill.

Allow room for the connection

If you fish a leader, leave enough braid above the backing for your longest cast or drop, a run and several reties. The knot joining braid to backing should stay below that working section.

Calculated examples

How Much Fits on These Reels?

Estimated full-spool capacity for the J-Braid X8 strength selected above, with no backing. These are calculated examples, not physical tests or recommendations for every pairing.

Loading capacity estimates...

J-Braid X8 questions, answered

Is the 30 lb Grand X8 lab result usable for this spool?

No. Line Laboratory lists standard JBraid x8 and JBraid Grand separately at 30 lb. The sample discussed here is standard X8 only.

Does the 150 in JB8U30-150DG mean 150 yards?

Not in this edition. The Dark Green filler table identifies it as 150 m, listed as 165 yd. A reel rating in yards and a package length in meters cannot be compared as bare numbers.

Specifications & sources

The inch/mm pairs and both length labels come from Daiwa's printed US catalog. The current product listing confirms the model codes, not a change in units. Check the printed package if your market or edition differs.

Calculations use the catalog's listed inch diameters. Published inch and millimeter values may differ slightly because of rounding.